Driver Software English ver.
LUXMAN Audio Driver for Windows PC/Mac
To operate a DA-150/D-03X/D-10X connected to a Windows PC using a USB cable, you must install the dedicated “Windows-ready USB driver” software.
The latest version of our “Windows-ready USB driver” can be downloaded from the link below.
※DA-250/DA-150/D-03X/D-10X do not ship with a driver software CD.
※If you don’t wish to use Bulk Pet Transfer using Mac, driver software doesn’t need to be installed.
※For details on Bulk Pet transmission, refer to the URL:
https://www.itf.co.jp/prod/audio_solution/bulk-pet
※DA-200 and DA-100 do not require the installation of this driver software.
Caution: Notes on driver versions
- The driver version, downloadable from the link below, is the software driver for Luxman models D-08u/D-06u/DA-06/DA-250/DA-150/D-03X/D-10X D/A converters connected to a Windows PC.
- D-08u and D-06u will not operate with a driver software version older than 1.0.4.2 and D-05u will not operate with a driver software version older than 1.0.5.3. DA-250 will not operate with a driver software version older than 1.0.6.0 and DA-150 will not operate with a driver
software version oldert than 1.0.7.0. D-N150 will not operate with a driver software version older than 1.0.27 when connected to a Windows PC.
- If you have a previous version of our software driver on your windows PC, please be sure to uninstall it and freshly install the latest version.
Important: The latest version of our driver software will not work properly on your Windows PC if there is an earlier version installed.
LUXMAN Audio Driver for Windows 1.0.29
LUXMAN Audio Driver for Mac 1.0.1